Home >

Knowledge

09Nov 2022

The accuracy of the gears

Gear accuracy refers to the comprehensive error of the gear shape divided into a level, including tooth shape, tooth direction, radial jump and other important parameters, wherein tooth shape refers t
05Nov 2022

The failure form of the gear

1. Tooth surface wear For open gear transmission or closed gear transmission containing unclean lubricating oil, due to the relative sliding between the meshing tooth surfaces, some harder abrasive gr
30Oct 2022

What are car gears

There are many steel grades for gears of medium and heavy duty trucks in China, mainly to meet the requirements of the introduction of foreign advanced automobile technology at that time. In the 50s,
25Oct 2022

What are the materials used to make gears?

The steels commonly used in the manufacture of gears are quenched steel, quenched steel, carburized quenched steel and nitriding steel. Cast steel has a slightly lower strength than forged steel and i
20Oct 2022

Machining method and steps of Bevel gears

1. Select the bevel gear milling cutter. Since the diameters of the large end and the small end of the bevel gear are not equal, the diameter of the base circle of the large and small ends is not equa
15Oct 2022

Machining of bevel gears

Bevel gears are mainly used for transmission where two shafts intersect, and the angle between the two shafts is usually 90°, but can also be less than 90°. Bevel gears are generally processed on spec
10Oct 2022

Basic introduction to bevel gears

Bevel gears are also called bevel gears, bevel gears. For transmission between intersecting shafts. Compared with cylindrical gears, it is possible to change the direction of transmission. Single-stag
05Oct 2022

Type and use of the Splined Shaft

There are many types of flower keys, but the most common is the rectangular flower axis and the gradual opening flower keys. However, rectangular flower keys are most widely used, especially in typica
30Sep 2022

How to process the Splined Shaft

Flower milling is one of the several processes of the cutting key, which is the process of processing the tooth into the inner flower or outer flower key. Flower cutting can be used to create a shafts
25Sep 2022

Gear classification

The gear can be classified according to the shape of the tooth shape, the shape of the gear, the shape of the tooth line, the surface of the wheel tooth and the manufacturing method. The tooth shape o
20Sep 2022

What are the models of gear

Classified according to specifications or size, the gear model is divided into standard and non -standard; Different from domestic and foreign measurement units, gear models are divided into two types
15Sep 2022

Why did the choose electroless nickel plating instead of electroless nickel p...

Nickel plating can add durability, hardness, electrical conductivity and heat resistance to a product, in addition to preventing corrosion and enhancing its aesthetic appeal. Before getting electropla

First 12 Last 1/2

Knowledge

The accuracy of the gears

The failure form of the gear

What are car gears

What are the materials used to make gears?

Machining method and steps of Bevel gears

Machining of bevel gears

Basic introduction to bevel gears

Type and use of the Splined Shaft

How to process the Splined Shaft

Gear classification

What are the models of gear

Why did the choose electroless nickel plating instead of electroless nickel p...